POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED
POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED
CAS: 31692-79-2
Molecular Formula:
POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED - Names and Identifiers
POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED - Physico-chemical Properties
POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
| WGK Germany | 1 |
| RTECS | VW3157812 |
POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED - Introduction
POLY(DIMETHYLSILOXANE), also known as HYDROXY TERMINATED, is a polymer containing hydroxyl functional groups. It is a colorless or yellowish liquid with low viscosity and good chemical stability.
This polymer has the following main properties:
1. High temperature stability: can withstand the application under high temperature conditions, and maintain chemical stability and physical properties;
2. Low temperature performance: at low temperature still maintain soft deformation, no brittle;
3. Chemical resistance: good resistance to acid, alkali, solvent, etc;
4. Excellent electrical insulation properties: widely used as electrical insulation materials;
5. Good lubrication performance: excellent performance in friction and lubrication applications;
6. Biocompatibility: can be accepted by the organism, and used in the biomedical field.
Due to these unique properties, POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED is widely used in many fields, including but not limited:
1. Electronics industry: used for encapsulation, insulation and lubrication of electronic components;
2. Cosmetics and personal care products: as emulsifiers, lubricants, anti-foaming agents and solubilizers;
3. Medical equipment: used for the production of artificial organs, emulsion, medical tape, etc;
4. Coatings and coatings: good wear resistance, chemical resistance and high temperature resistance;
5. Textile industry: used for fiber lubrication, increase elasticity and antistatic;
6. Rubber industry: It can increase the processability and softness of rubber.
The preparation method of POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED is usually obtained by reaction. One common method is to react the corresponding Silicon monomer with an organic hydroxy compound to form a hydroxy-terminated polydimethylsiloxane by addition polymerization of a hydrated silane.
Regarding safety information, such polymers can generally be considered relatively safe. However, due to differences in individual sensitivity and application environment, correct operating procedures should be followed and necessary personal protective measures should be taken during use. During use and handling, contact with skin, eyes and respiratory tract should be avoided, and good ventilation conditions should be maintained. In case of ingestion or contact, wash and consult a doctor.
This polymer has the following main properties:
1. High temperature stability: can withstand the application under high temperature conditions, and maintain chemical stability and physical properties;
2. Low temperature performance: at low temperature still maintain soft deformation, no brittle;
3. Chemical resistance: good resistance to acid, alkali, solvent, etc;
4. Excellent electrical insulation properties: widely used as electrical insulation materials;
5. Good lubrication performance: excellent performance in friction and lubrication applications;
6. Biocompatibility: can be accepted by the organism, and used in the biomedical field.
Due to these unique properties, POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED is widely used in many fields, including but not limited:
1. Electronics industry: used for encapsulation, insulation and lubrication of electronic components;
2. Cosmetics and personal care products: as emulsifiers, lubricants, anti-foaming agents and solubilizers;
3. Medical equipment: used for the production of artificial organs, emulsion, medical tape, etc;
4. Coatings and coatings: good wear resistance, chemical resistance and high temperature resistance;
5. Textile industry: used for fiber lubrication, increase elasticity and antistatic;
6. Rubber industry: It can increase the processability and softness of rubber.
The preparation method of POLY(DIMETHYLSILOXANE), HYDROXY TERMINATED is usually obtained by reaction. One common method is to react the corresponding Silicon monomer with an organic hydroxy compound to form a hydroxy-terminated polydimethylsiloxane by addition polymerization of a hydrated silane.
Regarding safety information, such polymers can generally be considered relatively safe. However, due to differences in individual sensitivity and application environment, correct operating procedures should be followed and necessary personal protective measures should be taken during use. During use and handling, contact with skin, eyes and respiratory tract should be avoided, and good ventilation conditions should be maintained. In case of ingestion or contact, wash and consult a doctor.
Last Update：2024-04-09 21:04:16